Dan Devine   how to turn your car inside out 24 april - 24 may 1998     Inside Out Car, 1998 alpine white with brown interior     how to turn your car inside out by dan devine (1998) assemble your tools in an orderly fashion near your car. be sure to have a pile of clean rags at your disposal. start by removing the battery to inactivate all systems. remove all fluids. use your saws-all with a fine toothed metal blade. there are other tools you can use in addition, such as an angle-grinder with cut-off blade, snips, hammer and chisel, and a cutting torch, but you will find the saws-all can perform almost all the procedures. now you just cut your car apart. some may want to first mark their intended cuts beforehand and others will start right in, relying on intuition. i prefer the spontaneous approach. look out for falling or sharp objects. now that you have cut your car into pieces, carefully lay them out in a large open space with room for walking between. take each indivdual piece and clean it. this procedure must be done with great care so you wll gain a fuller understanding of where the pieces came from and where you will put them upon re-assembly. after you have cleaned all the parts you can start the long process of turning your car inside-out. remember the insides of objects are smaller than the outsides. the re-assmbly will require some cutting, bending, and welding. use your own judgment in shaping your inside-out car. you will need to make new upholstery and carpets. a hint for operating your inside-out car: bear in mind that every operation produces a reversed effect. you must turn left to go right, forward is backward.           proposed project sketch inside out motor home     read some press about dan devine @ pierogi 2000...
	browse the flatfile
	P   I   E   R   O   G   I 177 north 9th street brooklyn, ny 11211 718.599.2144 noon to 6p thursday through monday and by appointment pierogi is an innovative art gallery in williamsburg, brooklyn, new york